Talking about the Common Sense of Installation and Selection of Oil Press machine
Before installation, the newly purchased oil press should be thoroughly cleaned. Extract the spindle, remove the upper pressing cage, and use an emery cloth to polish the outer and inner surfaces of the pressing screw, as well as the screw feeder, to a smooth finish. Add lubricating grease to all lubrication parts, and the type and grade of lubricating oil added in the gearbox should meet the requirements in the manual. After the round row is polished and cleaned, it must be arranged in its original position during installation and cannot be misaligned, as the arrangement position and order of the round row have a great impact on the oil extraction performance.
1. The correct installation of the oil press is to use a compression nut after the round row is installed, and the degree of compression should be such that the disc can wriggle during the oil press. After the above treatment, the oil press can be fixed on the foundation with anchor bolts. During installation, the belt pulley of the electric motor should be aligned with the belt pulley of the oil press, with a moderate position and correct rotation direction. The tightness of the transmission belt should be adjusted appropriately. Before installation, the newly purchased oil press should be thoroughly cleaned. Extract the spindle, remove the upper pressing cage, and use an emery cloth to polish the outer and inner surfaces of the pressing screw, as well as the screw feeder, to a smooth finish. Add lubricating grease to all lubrication parts, and the type and grade of lubricating oil added in the gearbox should meet the requirements in the manual. After the round row is polished and cleaned, it must be arranged in its original position during installation and cannot be misaligned, as the arrangement position and order of the round row have a great impact on the oil extraction performance.
2. Selection and purchase of oil press
A good oil press can save users a lot of trouble in oil processing. The selected model can process rapeseed, soybean, peanut, cottonseed, tea seed and other granular oils. When purchasing the machine, first check whether the paint on the surface of the machine is uniform, check whether the parts of the machine are missing, and then manually rotate the large belt pulley to make it rotate several more cycles to check whether there are iron blocks and other foreign matters in the squeezing chamber, and whether there is jamming. At the same time, pay attention to whether the gear mesh in the gearbox is normal.