Flour processing is inseparable from the use of the flour machine. However, when the flour machine is used for a period of time, some small problems will occur. At this time, we need to have some understanding of the failure of the flour machine, so as to find out the cause of the failure at the first time. The following Let's learn how to solve the abnormal situation of the flour machine.
If the operation of the flour machine is abnormal, the power must be cut off before checking the fault. This is also a safety measure for maintenance personnel. If the flour machine does not run after it is turned on, the following faults may have occurred: poor power contact or The plug is loose, the power switch is in poor contact, the micro switch is in poor contact, the thermal protector is invalid, etc. The troubleshooting measures are: replace the connector or repair the power supply, check whether the switch is damaged, adjust the micro switch, and replace the thermal protector.
After electrification, the motor does not rotate, and it also produces vibration or low speed. The fault may be: the mechanical part is stuck and the centrifuge does not open. Low voltage can also cause this situation. The way to eliminate the failure is to clean up the foreign matter in the crushing tank, and after opening it for half a minute, slowly feed and correct the power supply voltage.